Industrial News
Home / News / Industrial News / Glitter Transparent Plastic Tumbler Production Starts with Mold Precision

Glitter Transparent Plastic Tumbler Production Starts with Mold Precision

A Glitter Transparent Plastic Tumbler looks simple on a shelf, yet its sparkle and clarity depend on a sequence of molding, decorating, and sealing steps. Clear plastic reveals every flaw, so a tiny bubble, a scratch from the mold, or a weak seam shows up at once. Process control therefore carries more weight here than on an opaque cup.

Material and Mold Preparation

Resin choice is part of the customization. Yongkang Xiaoyu Industry & Trade Co., Ltd. can specify AS (SAN), acrylic (PMMA), or another clear resin according to the clarity, impact resistance, and price a program calls for. AS gives good rigidity at a moderate cost, while acrylic offers a glassier look and higher surface gloss. Both resins absorb moisture and are dried before molding, commonly near 80 °C for several hours, because trapped water leaves silver streaks and haze in the finished wall.

Tooling is the next step. A double-wall cup needs one mold for the inner cup and another for the outer shell, and for a Glitter Transparent Plastic Tumbler the cavity surfaces are polished to a mirror finish because every mark transfers to the part. A 750 ml (26 oz) body such as the DN-6126 needs balanced gating and cooling channels so wall thickness stays even from base to rim.

Injection Molding and Stress Relief

_0007_h9221f567eb16493c91815e60f05

For a Glitter Transparent Plastic Tumbler, barrel temperatures typically fall between 200 and 260 °C depending on resin grade, with injection speed controlled to avoid flow lines. After ejection, gate marks are trimmed, and acrylic parts often go through annealing, a low-temperature heat soak that relieves internal stress. Stress matters because a clear cup that looks sound can craze when it meets ice, detergent, or a drop.

Decoration: Snowflakes and Glitter

Artwork is applied before the walls are joined. Printed film, heat transfer, and hot stamping are common ways to place a snowflake pattern on the inner or outer wall, and when the pattern sits between the walls, daily washing cannot rub it away.

Glitter placement is another customization choice. Flakes can be sealed into the cavity between the walls, where they move freely and catch light as the cup turns, or mixed into a coating on a wall for a fixed, even shimmer. Flake size shapes the look as well. Fine flakes give a soft, uniform sparkle, while larger flakes scatter light more boldly. Dosing the glitter by weight keeps each Glitter Transparent Plastic Tumbler in a batch visually consistent. Xiaoyu lists six stock colors for this model and can apply customized logos.

Assembly and Sealing

Ultrasonic welding joins the inner cup and outer shell at the rim. High-frequency vibration melts the plastic along a small ridge designed for the purpose, forming a continuous seal with no adhesive that could yellow or leave an odor. Weld depth, amplitude, and pressure are set through trial runs, and sample cups are cut open or pressure tested to confirm the seam. On a Glitter Transparent Plastic Tumbler, a weak seam allows moisture in, and lets loose flakes out when the cavity holds glitter, so this stage receives close attention.

The lid and straw are molded separately, usually in polypropylene, and fitted with a sealing gasket. Thread fit and straw length are checked against the body before assembly. The cup uses BPA-free plastic and suits cold and room-temperature drinks such as iced coffee, tea, and smoothies, in line with how clear plastics behave under heat.

Logo Printing, Inspection, and Packing

On a Glitter Transparent Plastic Tumbler, silk screen, pad printing, and hot stamping are common logo methods for curved clear surfaces. Fixtures hold the cup so the logo sits correctly against the snowflake pattern, and a proof sample lets a brand approve placement before a production run. Xiaoyu provides sample, OEM, and ODM service for this purpose, which suits promotional and seasonal programs.

Final inspection of each Glitter Transparent Plastic Tumbler takes place under strong light, looking for bubbles, black specks, scratches, and cloudy areas, and it also covers weld quality, leak testing with water, and lid thread fit. Packing in an OPP bag and white box protects the glossy surface during transit. The Xiaoyu range has passed FDA and LFGB food-grade certification, supporting shipments to the United States, Japan, and South Korea.

The appeal of a Glitter Transparent Plastic Tumbler lies in its sparkle, but that sparkle is the outcome of dry resin, polished tooling, relieved stress, and clean welds. Each of those steps leaves a mark that clear plastic shows, which is why process discipline is part of the product itself.

Product Consultation